Post-Installation: Avoid washing your vehicle for at least 48 hours to allow film to properly adhere and cure. XPEL also recommends purchasing and installing a new set of premium windshield wiper blades.

• Hand Washing: We recommend hand washing your vehicle using XPEL Wash Solution or Foam Soap and a soft microfiber mitt. Rinse thoroughly with water.

• Pressure Washing: Keep the nozzle at least 36 inches (1 meter) away from the film when using a pressure washer. Avoid spraying directly at the edges of the film to prevent lifting. We recommend using a 40-degree nozzle.

• Avoid harsh chemicals: Do not use strong chemicals, solvents, or abrasive cleaning tools on the film, as these can damage the protective coating.

• Drying: Always dry the vehicle with a clean, soft microfiber towel to avoid water spots. Avoid letting the vehicle air-dry in direct sunlight.

• Keeping your windshield and wipers clean will increase the longevity of your film, as well as reduce the chance of scratches in the film

  • We strongly suggest keeping a bottle of detail spray / waterless wash and clean throw-away microfiber towels in your care to routinely clean off your windshield after contaminants have dried (while at work, in the store, etc..)

  • Spray your windshield with the solution and with your microfiber towel folded in fourths, gently wipe away contaminants then flip your towel to the dry side (or a second dry towel) to gently buff off the excess solution.

• Bird Droppings & Bug Splatter: Remove contaminants like bird droppings and bug splatter as soon as possible to prevent staining. Use warm water and a pH neutral soap (XPEL Wash Solution or Foam Soap). In an emergency on-the-go you can apply XPEL SiO2 Waterless Wash to the affected area and wipe off with microfiber towel.

• Tree Sap & Tar: For stubborn contaminants like tree sap and tar, use a 50/50 Water & Isopropyl Alcohol in a spray bottle. Spray the mixture directly onto microfiber towel and wipe the affected area.

• Regular Cleaning: To maintain the clarity and appearance of the film, clean the film regularly with XPEL Wash Solution or Foam Soap. For an all-in-one solution, the XPEL TPU Windshield Protection Film Maintenance Kit (M1291, sold separately) includes XPEL Waterless Wash, Water-spot Remover, and Glass Cleaner.

• Avoid Waxing: Do not apply waxes or polishes that contain dyes, abrasive compounds, or solvents directly onto the film

• Keeping your windshield and wipers clean will increase the longevity of your film, as well as reduce the chance of scratches in the film

  • We strongly suggest keeping a bottle of detail spray / waterless wash and clean throw-away microfiber towels in your care to routinely clean off your windshield after contaminants have dried (while at work, in the store, etc..)

  • Spray your windshield with the solution and with your microfiber towel folded in fourths, gently wipe away contaminants then flip your towel to the dry side (or a second dry towel) to gently buff off the excess solution.

• Snow and Ice Removal: Avoid using sharp tools or metal scrapers that could damage the film.

• Keeping your windshield and wipers clean will increase the longevity of your film, as well as reduce the chance of scratches in the film

  • We strongly suggest keeping a bottle of detail spray / waterless wash and clean throw-away microfiber towels in your care to routinely clean off your windshield after contaminants have dried (while at work, in the store, etc..)

  • Spray your windshield with the solution and with your microfiber towel folded in fourths, gently wipe away contaminants then flip your towel to the dry side (or a second dry towel) to gently buff off the excess solution.

• Wiper Blades: We recommend replacing your windshield wiper blades regularly to prevent scratches or damage to the film.

• WPF Restore Application: WPF Restore enhances the hydrophobic properties of the film, ensuring optimal performance and longevity.

• Application Instructions:

  • Ensure your XPEL WINDSHIELD PROTECTION FILM is clean and completely dry

  • Shake the bottle of WPF RESTORE well before use.

  • Lightly mist the product onto the windshield, working one section at a time. Divide the windshield into 4 sections for even coverage.

  • Using a clean microfiber towel, spread the product evenly across each section. Buff until the film has a smooth, clear finish.